LED Reflective Safety Vest with Lights

Description

Product Overview

Worksafetydirect built this LED Reflective Safety Vest with Lights to improve visibility after dark. The vest uses front white LEDs and rear red LEDs. Choose steady, flash, or SOS modes with the button. The mesh fabric breathes and feels light for long wear.

We designed the vest for runners, cyclists, delivery riders, and roadside workers. Adjustable shoulders and a secure waist band fit sizes S to XXL. LED modules detach so the mesh can be cleaned safely. Reflective tape runs front and back for passive visibility when LEDs are off.

Battery life is published and reliable. A 2200 mAh rechargeable battery gives about 20 hours in low mode. High mode runs about six hours. The vest charges with a USB C port in under 90 minutes. We list lumen values and measured visibility distances in the spec sheet.

Standards matter to us and buyers. The vest meets ANSI Class 2 visibility rules for many work sites. We test reflective tape performance to EN ISO 20471 guidance when relevant. The module housings meet IP65 water resistance for splash protection.

This vest combines active LED light with passive reflective tape for full time visibility. Active LEDs increase detection by drivers at range in low light. Reflective tape improves visibility when headlights hit the strips. The combined system works in fog, dawn, dusk, and light rain.

Key features and specifications:

Front and rear LED arrays provide omnidirectional presence.
USB C fast charge with 2200 mAh battery and charge time under 90 minutes.
Three lighting modes plus an SOS emergency function.
Detachable LED modules allow safe machine washing.
Lightweight mesh with adjustable closures and reinforced stitching.
IP65 splash resistance and published lumen numbers.

Use cases and real examples:

For runners this vest increases driver noticeability at city intersections. Cyclists gain extra side visibility on dark roads. Delivery riders keep cargo secured and stay visible in busy traffic. Maintenance crews and flaggers get active signaling for work zones.

Care and maintenance instructions:

Remove LED modules before washing the vest. Machine wash cold on a gentle cycle using mild detergent. Do not use bleach or fabric softeners. Hang to dry. These steps protect reflective coating and electronics. Guidance like this is standard for hi-vis garments.

What we add that competitors often omit.

We publish lumen per LED and runtime per mode. We provide a visibility test video and measured distances. We include certification details and provide a one year warranty. Each vest ships with a carry pouch and quick start guide.

Insider tips for best use

Use steady mode near busy intersections for continuous signal. Switch to flash mode to attract attention on long stretches. Place the vest over darker clothing for maximum contrast. Keep the port cover closed to retain IP65 protection.

Common FAQs:

How long does the battery last?

Low mode up to 20 hours. High mode about six hours.

Is the vest machine washable?

Yes after removing LED modules.

Is it suitable for work?

Yes. It meets ANSI Class 2 standards for many roadside jobs.

How far away can drivers see this?

Visibility varies with light and conditions. See our measured video at 10, 30, and 100 meters.

Order your Worksafetydirect LED Reflective Safety Vest with Lights today for proven nighttime visibility.